UPS 6KVA ~ 10KVA

APPLICATION
Servers, Data centers, Critical network devices, Sensitive electronic equipment, Telecom...


KEY FEATURES
lTrue online double conversion technology
Wide input voltage range
Zero transfer time
Protection against all types of power problems
No add-on CNTL unit required for parallel connection
Low initial investment and flexible for future expansion
Highest reliability and maximum performance for power sharing and redundancy
Equipped with Maintenance Bypass Switch
Smart RS232 and Intelligent slot interface
Sealed lead-acid, maintenance free battery


TECHNICAL SPECIFICATIONS

Model G6KN G10KN
Rated Power VA/W 6kVA/4.2kW 10kVA/7kW
Input Nominal Voltage 220VAC
VoltageRange 176 ~ 276VAC
FrequencyRange 46 ~ 54Hz
Power Factor 0.98
Connection Hardwired
Output Voltage 220VAC ±1%
Frequency 50Hz ±0.1% (Battery mode)
Waveform Sine Wave
Power factor 0.7
Voltage Distortion 2% under linear load
Overload Capability 105% ~ 130% for 10 min., ³130% for 1 min.
Current Crest Ratio 3:1 max.
Connection Hardwired
Battery Type Sealed, Maintenance free, Lead-Acid (Panasonic)
Quantity 20 pieces
Back-up time (full load) 7 min 5 min
Recharge time 8 hrs to 90% of capacity after full load discharge
Transfer time 0 ms
Maintenance Bypass Switch Yes
LED indicators Status Load level/Battery level,Battery , Utility power, Inverter, Bypass, Overload, Fault
Audible alarm Bypass Alarm beeps every two minutes
Battery discharge Alarm beeps every four seconds, every second if battery low
Overload Alarm beeps two for every second
Fault Alarm beeps continuously
Acoustic noise At 1 meter distance £ 55 dBA
Communications DB-9 Port RS232 serial interface
Intelligent Slot Options: WebPower, AS400 or WinPower CMC
ParallelPort up to three units in parallel for power redundancy and load sharing
Environmental Operating temperature 0 ~ 40°C
Operating humidity 20% ~ 90% non-condensing
Weight Net (kg) 84 93
Dimensions W x D x H (mm) 260 x 570 x 717

Model G6KNS G10KNS
Rated Power Volt-Amps/Watts (VA/W) 6kVA/4.2kW 10kVA/7kW
Input Nominal Voltage 220VAC
VoltageRange 176 ~ 276VAC
FrequencyRange 46 ~ 54Hz
Power Factor 0.98
Connection Hardwired
Output Voltage 220VAC ±1%
Frequency 50Hz ±0.1% (Battery mode)
Waveform Sine Wave
Power factor 0.7
Voltage Distortion 2% under linear load
Overload Capability 105% ~ 130% for 10 min., ³130% for 1 min.
Current Crest Ratio 3:1 max.
Connection Hardwired
Battery Type Sealed, Maintenance free, Lead-Acid (Panasonic)
Nominal DC Voltage 240VDC
Back-up time Depends on the capacity of the external battery bank
Connection ExternalBattery Socket
Transfer time 0 ms
Maintenance Bypass Switch Yes
LED indicators Status Load level/Battery level,Battery , Utility power, Inverter, Bypass, Overload, Fault
Audible alarm Bypass Alarm beeps every two minutes
Battery discharge Alarm beeps every four seconds, every second if battery low
Overload Alarm beeps two for every second
Fault Alarm beeps continuously
Acoustic noise At 1 meter distance £ 55 dBA
Communications DB-9 Port RS232 serial interface
Intelligent Slot Options: WebPower, AS400 or WinPower CMC
ParallelPort up to three units in parallel for power redundancy and load sharing
Environmental Operating temperature 0 ~ 40°C
Operating humidity 20% ~ 90% non-condensing
Weight Net (kg) 35 38
Dimensions W x D x H (mm) 260 x 570 x 717